C-NET :: PROJECTS

cat pfsense-as-a-cisco-anyconnect-vpn-client-using-openconnect.md

pfSense as a Cisco AnyConnect VPN Client using OpenConnect

Posted
Updated
Filed under
Howto's · Linux · Solved Problems

pfSense, as of 2016-03-01, does not support OpenConnect out of the box. However, it's in the FreeBSD repository, and relatively easy to add:

# pkg
# pkg update -f
# pkg install openconnect
# rehash
bash

You can now play around with the openconnect command and test your connection.

Next step: Autostart, and adding the tun interface to the pfSense GUI. The GUI will, by default, ignore any interface named tun*, while openconnect will refuse to work with any interface not named tun*. Brilliant. The easiest workaround for this special case seems to be renaming the VPN interface after creation.

I made a script that automates checking if the connection is up, and (re-)starting it if it is not. Replace the options in the "settings" section with appropriate values for your setup, and you should be good to go.

The "test" field should be a command that returns 0 when the connection is up, and anything else when it's broken. I used netcat's port testing feature on the remote desktop port of a server I needed to be able to connect to, but you can just as easily use things like ping with a limited count or similar.

#!/bin/sh

# settings
user="vpnuser"
pass="P4ssw0rd"
host="vpn.server.here.com"
test="nc -v -w 10 -z 172.16.0.4 3389"
tmpif="tun69"
iface="ocvpnc1"
pidfile="/tmp/${iface}.pid"
script="/usr/local/sbin/vpnc-script"

# env
openconnect="/usr/local/sbin/openconnect"
ifconfig="/sbin/ifconfig"

# func
ifkill()
{
        $ifconfig "$1" down 2>/dev/null || :
        $ifconfig "$1" destroy 2>/dev/null || :
}

# check if we're already running
if [ -n "$test" ] && $test; then
        echo "Connection is already up"
        exit 0
fi

# clean up previous instance, if any
if [ -e "$pidfile" ]; then
        read pid <"$pidfile"
        echo "Killing previous pid: $pid"
        kill -TERM "$pid"
        rm "$pidfile"
fi
ifkill "$tmpif"
ifkill "$iface"

# open vpn connection
echo "$pass" |\
$openconnect \
        --background \
        --pid-file="$pidfile" \
        --interface="$tmpif" \
        --user="$user" \
        --passwd-on-stdin \
        --script="$script" \
        "$host"

# rename the interface
if [ "$iface" != "$tmpif" ]; then
        echo "Renaming $tmpif to $iface"
        $ifconfig "$tmpif" name "$iface"
fi
bash

Next, use crontab -e and add an entry to run the script regularly.

*/5 * * * * /root/openconnect-vpn >/dev/null 2>&1
text

Again, replace the path and timing with your own preferred values.

With the connection established, you can now go ahead and add the interface in the "assignment" tab of the GUI and set up appropriate rules for it.

Caution

CAUTION: Adding an interface that's not available at boot time to the GUI will cause pfSense to think something is wrong on subsequent reboots and ask you to configure interfaces. I am not currently aware of a workaround for this, other than to not add the interface, controlling rules directly from the script instead. Please use the workaround below to avoid this issue, and make sure to verify that it works before leaving a pfSense box at a remote site unattended.

Interface boot workaround

The following workaround was offered by "DJC" in the comments section:

  1. Install “Shellcmd” in PfSense WebConfigurator:
    System => Package Manager => Available Packages
    Find Shellcmd and INSTALL
  2. Navigate to Shellcmd:
    Services => Shellcmd
  3. Add the following item in Shellcmd:
    Command: /sbin/ifconfig tun create; /sbin/ifconfig tun0 name ocvpnc1
    Shellcmd Type: earlyshellcmd
    Description: Create tunnel interface for OVPNC1 at boot

Comments